Double Twist Stranding Machine
-
Price:
Negotiable
- minimum:
- Total supply:
-
Delivery term:
The date of payment from buyers deliver within days
-
seat:
Beijing
-
Validity to:
Long-term effective
-
Last update:
2022-07-10 03:24
-
Browse the number:
225
+
- Contactaixin:
lianming(Mr.)
- Email: telephone: phone:
-
Arrea:
Beijing
Address:No.29, Luji National Pioneer Park, Jiepai Town, Binhai County, Yancheng City, Jiangsu Province, China
- Website:
+
Set up the preparation technology and quality control | ||||||
The serial number |
Name of purchased equipment |
Overall dimensions |
Model |
The number of |
The weight of the |
|
1 |
High speed tube twister |
Width 1000* height 1300* length 6800 |
6/165 |
2200KG |
||
Equipment composition |
1, the equipment is composed of Central Line, barrel, forming, traction, retracting line, electric control part; |
|||||
Project |
The serial number |
Equipment structure |
Function requirements and parameters of the device |
Note |
||
The base |
1 |
Diameter of wire before twisting (mm) |
0.1 ~ 0.30 |
|||
2 |
Diameter after twist (mm) |
0.3 ~ 1.5 |
||||
3 |
Twist range (mm) |
1 ~ 50 |
||||
4 |
Equipment speed (R.P.M.) |
Maximum speed 3000 RPM, working speed 2800 RPM, equipment speed adjustment can be set password (PLC function control) |
||||
5 |
Operating Direction of equipment |
Facing the device, the wire is on the right hand side |
||||
6 |
Twist direction of system |
S/Z |
||||
7 |
Tube threading mode |
The threading |
||||
8 |
Steel wire strength grade range (Mpa) |
600 ~ 2800 |
||||
9 |
Stop when the pre-designed meter length is reached |
Measuring meter adopts PLC automatic stop to measuring meter, meter accuracy ≤ 1.5%. |
||||
10 |
The equipment should stop automatically when the broken line is detected in the area of cylinder body and pressing die |
The equipment has disconnection stop alarm device. |
||||
11 |
LED lighting is installed inside the safety cover |
For shockproof lamps and lanterns, safety protection should be provided on the surface to avoid collision of other objects and steel wire |
||||
12 |
shield |
Each I-wheel corresponds to an observation window.The visible window is made of toughened glass, and the safety cover is flexibly opened up and down with seamless steel pipe. The machine can be stopped immediately if it is opened ≤150mm.When the safety cover is open and not locked, the platform can only be moved but cannot be started normally.The maximum noise is 82dB tested at a distance of 1000mm from the protective cover |
||||
Lay out the center wire |
|
The feeding type |
non-rotating |
|||
I wheel jacking system |
There are shaft type, bearing support mechanical constant tension line. |
|||||
The damping system |
Use special wear-resistant rope spring screw adjustment |
|||||
Diameter range of Releasing I-wheel (mm) |
165 (According to demander's I-wheel requirements) |
|||||
Inside the cylinder, the work wheel lays the line |
13 |
I wheel jacking system |
There are shaft type, bearing support mechanical constant tension discharge, tension fluctuation is less than 1N, tension range 1 ~ 15N. |
|||
14 |
The damping system |
Use special wear-resistant rope spring screw adjustment |
||||
15 |
Diameter range of Releasing I-wheel (mm) |
165 (According to demander's I-wheel requirements) |
||||
Cylinder part |
16 |
The number of I-wheels in each cylinder |
6 *1 section =6 |
|||
17 |
Type of wire system on the cylinder |
Install the guide wheel at each bend to pass the line, and ensure that the steel wire does not slip when laying out the line. |
||||
18 |
Inner diameter of tungsten carbide nozzle for outer wire routing |
The threading nozzle is made of hard alloy YG8 material, with an inner diameter of 5mm. It is fixed by screw tightening and glue to ensure reliable fixing. |
||||
19 |
Wire outlet Angle of wire tray |
The maximum Angle from the wire nozzle at the center of the flower plate to the wire nozzle at the barrel wall shall not exceed 30°. The maximum Angle of the two broken lines from the wire outlet of the first barrel to the wire inlet of the last barrel shall not exceed 25°. The maximum Angle of the broken lines from the wire outlet nozzle of the second barrel to the wire outlet of the parting disk shall not exceed 25°.Special alloy die should be installed at outlet or bend to ensure the steel wire does not slip from the alloy die. |
||||
20 |
Cylinder support bearing |
Large bearing |
Brand NSK |
|||
21 |
Cylinder support large bearing lubrication |
Grease lubricated, each bearing is installed on the bearing seat, operating temperature ≤75℃ |
||||
22 |
Bearing seat structure |
Ductile iron.(QT - 400) |
||||
23 |
Wall thickness (mm) |
Not less than 9mm |
||||
24 |
Cylinder system dynamic system |
Stop and emergency stop are distinguished. Normal stop should be stopped after deceleration, which can be achieved by energy consumption braking and other methods. Normal stop braking time is less than 20 seconds, and emergency stop should be completed within 10 seconds.Brake pads are easily replaced after wear. |
||||
25 |
Wire tray frame I-wheel lock |
The wire tray frame is equipped with shaft bearing to support vertical constant tension laying out, and automatic adjustment laying out tension device to ensure that each steel wire and strand laying out evenly.Damping tension screw adjustment for right hand operation.Each wire tray can meet the production needs of ø 165 I-wheel. |
||||
26 |
I wheel bearing mode |
Horizontal support wiring |
||||
27 |
I wheel damping in wire tray |
Automatic adjustment of wire tension device, ensure that each steel wire, strand uniform line. I wheel on the line, damping belt installed a spring, damping tension screw adjustment for the right hand operation. |
||||
28 |
Broken line detection device |
Break line alarm, PLC program control. |
||||
29 |
Parallel cylinder design |
The barrel body is an external threading line, ensure that the steel wire from the outlet of the barrel body to the closing mouth of the press die is uniform and there is no transverse bending phenomenon, and the maximum folding Angle between the outlet mouth of the barrel body and the outlet mouth of the wire plate shall not exceed 25°. |
||||
30 |
The host base |
Section steel + steel + concrete |
||||
31 |
Spindle drive box |
Spindless drive |
||||
Into |
32 |
Hole distribution of wire tray |
Set of 6 holes.The threading nozzle on each set of wire tray is made of hard alloy YG6X material, the inner diameter of the threading nozzle is 5mm, and the fixing method of glue is adopted to ensure the reliable fixing. |
|||
33 |
Pre deformation apparatus |
Bayonet installation is reserved and customized according to product structure specifications |
||||
34 |
Closing Angle of pressing die |
25 ° or less |
||||
35 |
Press line die holder structure |
The pressure spring adjusts the pressure |
||||
36 |
Pressing die size |
60*40*(20+20) LENGTH * width * height (height: size 40 after two pieces are closed) |
Can be customized |
|||
37 |
Mold base mobile |
The line pressing die frame adopts dovetail groove guide rail to adjust and move flexibly |
||||
38 |
After the deformer |
Customize according to product structure specifications |
||||
Holding |
39 |
traction |
Electrical control synchronization |
|||
40 |
Traction wheel diameter mm |
159 * 2 ¢ |
||||
41 |
Traction wheel type groove/plane type |
U groove |
||||
42 |
Traction wheel support system |
Bearing support |
||||
43 |
Number of slots/Slot diameter |
Article 8 to 9 / R3mm |
||||
44 |
Slot hardness |
Traction wheel material GCr15, hardness ≥HRC58-60o |
||||
45 |
The realization of twist distance transformation |
PLC infinitely variable speed |
||||
46 |
The meter device |
One end of the traction wheel is close to the switch meter |
||||
47 |
Electronic meter meter device |
PLC electronic meter, display on the display screen |
||||
48 |
Drive way |
Single active and double traction wheels |
||||
Closed |
49 |
Ribbon cable |
Servo motor control |
|||
50 |
Row moving mode |
Ball screw line, PLC control reversing |
||||
51 |
Vertical/horizontal regulating wheel |
Roller has R groove, bearing steel |
||||
52 |
Closed line support |
Receiving i-wheel adopts mechanical pneumatic top type |
||||
53 |
Take-up tension |
Hang tuo swing rod constant tension retracting line. |
||||
54 |
Size diameter of receiving I-wheel (mm) |
Customer to provide |
||||
Drive |
55 |
transmission |
There is no |
|||
56 |
The host driver |
The motor drives the cylinder to rotate |
||||
57 |
Main motor |
Variable frequency motor (5.5KW) |
||||
58 |
traction |
Servo motor |
||||
59 |
Take-up motor |
Frequency conversion motor |
||||
60 |
Main engine speed control |
The inverter |
||||
61 |
Complete machine electrical control |
PLC program control |
||||
62 |
display |
Touch screen |
http://www.jslmet.com/